#82 Wheelarch and lower corner repair
Everything seems to fit OK. Just held in with self-tappers at the moment ready to tack in and then recheck alignment.
Posts
#81 Rear of Quarter Panel
This is where the bumper mounts and was quite perforated. I've had to weld the holes up, brace it from the back and then put this patch on to properly hold the bumper on. Obviously I'll need to drill a new hole for the bumper bolt one it is to be re-fitted.
#80 Wheel Arch alignment
Looks OK so far. Will need to use some temporary fixings before any welding takes place. I will also need to attach the lower corner repair too.